Karcher HD 1040 B Instrukcja Użytkownika Pobierz pdf (Strona 17)

– 6

plug before doing any work on the appli-

ance.

Risk of burns! Do not touch hot silencers,

cylinders or radiator ribs.

 Check oil level.

Please contact Customer Service immedi-

ately if the oil is milky (water in oil).

 Clean the sieve in the water connection.

 Clean filter at the detergent suck hose.

Oil change:

 Ready a catch bin for appr. 1 Liter oil.

 Turn out the oil drain screw.

 Drain the oil in a collection basin.

 Turn out the oil drain screw.

 Slowly fill in new oil until the "MAX"

marking on the oil container.

Note

Air pockets must be able to leak out.

For oil type refer to technical specifica-

tions.

Carry out maintenance tasks to the engine

according to the specifications provided in

the operating instructions of the engine

manufacturer.

 Danger

Risk of injury!

 Check the high pressure hose for dam-

ages (risk of bursting).

Please arrange for the immediate ex-

change of a damaged high-pressure hose.

몇 Warning

Risk of damage! Freezing water in the ap-

pliance can destroy parts of the appliance.

Store the appliance in a heated room dur-

ing winter or empty it. During longer breaks

in operation, it is advisable to pump in anti-

frost agents into the appliance.

 Screw off water supply hose and high

pressure hose.

 Operate device for max. 1 minute until

the pump and conduits are empty.

Note

Observe handling instructions of the anti-

freeze agent manufacturer.

 Pump in conventional frost protection

agents through the appliance.

A certain corrosion protection is achieved

with this as well.

몇 Warning

Risk of injury if the machine is left running

in an unattended state. Remove the spark

plug before doing any work on the appli-

ance.

Risk of burns! Do not touch hot silencers,

cylinders or radiator ribs.

Follow operating instructions of the engine

manufacturer!

– Safety thermostat at the high pressure

pump has switched off the appliance af-

ter long period of cycle operation.

 Allow the appliance to cool down; then

restart it. Refer section "Interrupting op-

eration".

– Operating speed of the engine is too

low

 Check operating speed of the engine

(refer to technical data).

High-pressure pump

Weekly

Monthly

After 500 operating hours, at least annu-

ally.

Dispose of old oil ecologically or turn it in

at a collection point.

Motor

High pressure hose

Frost protection

Drain water

Flush device with anti-freeze agent

Troubleshooting

Appliance is not running

Device is not building up pressure

17EN

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 247 248

Komentarze do niniejszej Instrukcji

Brak uwag